There are two measurements you will need to take in order to find the correct replacement landing gear legs for your 2008 Heartland RV Cyclone 5th wheel trailer. These measurements include the overall length of the leg's outer tube and the distance between the two weld stops.
If you have a 29-1/2" long outer tube you can use part # LG-179013 for the lead leg and part # LG-179014 for the follow leg. However, in order to make sure these will be an exact fit for you, you will need to measure... view full answer...
Some of them come with hydraulic brakes. To replace the electric brakes on your Heartland's 7,000 lbs axles you will want the Dexter Nev-R-Adjust Electric Trailer Brake Kit item # 23-464-465. These are the self adjusting brake assemblies you are looking for. You will need one set per axle.
I have linked an installation video below. view full answer...
We were able to measure the distance for you from the top mounting holes to the top of the very top of the Curt RV Bumper Hitch # C19101.
As you can see by the accompanying diagram, the distance from the bottom of those mounting holes to the top of the hitch measures 1-1/8 inch so you will have enough clearance for the hitch to be installed without any interference.
I have added a link below to a video review for you to check out as well of the Curt RV Bumper Hitch # C19101. view full answer...
When a 5th wheel hitch's height is raised to increase clearance between the bottom of the trailer overhang and the tops of the truck's bed rails this can put the trailer into a nose-high orientation. Since trailers tow best when they are level it can be necessary to then also shift the pin box upward on its trailer mounts to restore the trailer to a level stance.
Sometimes adjusting the pin box upward will allow for that extra clearance and still allow the trailer to be close to level... view full answer...
The distance between each of the mounting brackets of the 24x84 etrailer Cargo Carrier for RV Bumper # e96ZR is 27-9/16 inches. The picture I attached came from the install instructions which are also linked on this page as well. view full answer...
The MORryde U-Bolts for 5,200-lb to 7,000-lb Round Trailer Axles # MR66ZR are grade 5 bolts. They have a thread pitch of 1/2-20 and maximum torque of 70 ft-lbs. view full answer...
The Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter # DM8550045 base measures 28 inches front to back and 30-1/2 inches side to side view full answer...
I would be happy to. Since your 2019 Heartland RV Landmark has 8,000 lbs axles you will need the Kodiak Disc Brake Kit item # K2HR89DD. These will replace the hubs and drums you have with rotors and hubs. The mounting brackets will attach to the flanges you already have. These are dacromet-plated rotors that have a 8 on 6-1/2 bolt pattern. You will need one set per axle.
For an actuator, brake lines, and a breakaway kit you will want the Hydrastar Electric Over Hydraulic Actuator Kit... view full answer...
I double checked with the manufacturer and you were correct in your assumption. On the 50 amp hardwire cord # A10-5025END, the one ground wire is 10 gauge, the other 3 wires are 6 gauge. I will have our website updated to reflect this. Sorry for any confusion. view full answer...
The seat height of the Dometic # DOM87FR Full-Timer RV toilet is 18-1/4 inches. I've provided a diagram with all the dimensions for reference. view full answer...
The center to center mounting hole distance for the Undampered Floor Register - 2" x 10" - Plastic - Black # 37202-29195 is 11" exactly.
Attached is a review video for you to check out as well. view full answer...
The Demco 5th Wheel Base Rails Adapter for B&W Turnoverball Gooseneck Hitches part # DM6140 has a shipping weight of approximately 86 lbs. view full answer...
The LaSalle Bristol CrossBreeze Adjustable Toy Hauler Screen, # 3441409775PBK is for a 97-3/4" wide opening on the toy hauler. The side rails/track that the screen travels are 2-1/4" wide (one rail each side) so once in place, the Toy Hauler Screen, # 3441409775PBK will have an opening of approximately 93-1/4" for you to drive a toy through. view full answer...
A 2-3/4" wheel stud for your 2011 Heartland North Trail fifth wheel is the Replacement Drive-In Trailer Hub Wheel Stud - 5/8"-18 x 2-3/4" Long - Quantity 1 Item # 7-232. view full answer...